O 48,0-JO22-B-1V3-1-T1-LF

Oscillator JO22 · 1.8 V ~ 3.3 V RoHS 2011/65/EC - SMD Oscillator with Stop Function • 2.5 x 2.0 mm - LVCMOS / HCMOS compatible output - Variable supply voltage 1.8 V ~ 3.3 V - Very low current consumption - Seam sealed ceramic/metal package actual size RoHS compliant Pb free REACH compliant Conflict mineral free TABLE 1: FREQUENCY STABILITY CODE GENERAL DATA TYPE JO22 1.8 V ~3.3 V frequency range 1.0 ~ 50.0 MHz (15 pF max.) frequency stability over all* ± 25 ppm ~ ± 100 ppm (see table 1) -20 °C ~ +70 °C current consumption see table 2 -40 °C ~ +85 °C supply voltage VDC 1.8 V -10% ~ 3.3 +10% variable temperature -10 °C ~ +70 °C up to -40 °C ~ +125 °C (table 1) operating A B G C ± 100 ppm ±50 ppm ± 30 ppm ± 25 ppm     T1    -40 °C ~ +105 °C T2   -40 °C ~ +125 °C T3  stability code storage -55 °C ~ +125 °C  available rise & fall time 6 ns max. (1.8 V) / 5 ns max. (≥ 2.5 V) * includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year. load max. 15 pF current max. 4.0 mA low level max. 0.4 V TABLE 2: CURRENT CONSUMPTION MAX. high level min. VDC – 0.4 V Supply current max. load 1.8 V 2.5 V 3.3 V output enable time max. / typ. 1 ms / 0.5 ms 1.0 ~ 9.9 MHz 15 pF 1.0 mA 1.3 mA 2.0 mA output disable time max. 200 ns 10.0 ~ 19.9 MHz 15 pF 1.6 mA 2.0 mA 3.0 mA start-up time max. / typ. 1 ms / 0.5 ms (t0 when VDC > 1.62 V) 20.0 ~ 29.9 MHz 15 pF 2.2 mA 3.0 mA 4.0 mA standby function stop 30.0 ~ 39.9 MHz 15 pF 2.5 mA 3.5 mA 5.0 mA standby current max. 10 µA (T1) / 20 µA (T2, T3) 40.0 ~ 50.0 MHz 15 pF 3.0 mA 4.5 mA 6.0 mA output phase jitter 12 kHz ~ 20.0 MHz < 1.0 ps RMS symmetry at 0.5 x VDC 45% ~ 55% max. (ref. +25 °C) note: please also refer to I/V plots showing typical supply current at 5pF / 10pF / 15pF note: rise time: 0.1 VDC ~ 0.9 VDC / fall time: 0.9 VDC ~ 0.1 VDC DIMENSIONS 0.95±0.05 0.4 #2 #1 0.78±0.05 top view side view bottom view 0.80 ±0.1 #2 #4 1.45±0.1 2.0±0.1 #1 #3 0.80±0.1 #3 0.65±0.05 #4 0.90±0.1 0.68 ±0.05 2.5 ±0.1 # 1: e/d # 2: ground # 3: output # 4: VDC 1.85±0.1 pad layout pin connection in mm ORDER INFORMATION O frequency type frequency stability code supply voltage code output load code Oscillator 1.0 ~ 50.0 MHz JO22 see table 1 1V3 = 1.8 V ~ 3.3 V 1 = 15 pF option blank = -20 °C ~ +70 °C T1 = -40 °C ~ +85 °C T2 = -40 °C ~ +105 °C T3 = -40 °C ~ +125 °C Example: O 20.0-JO22-G-1V3-1-T1-LF (Suffix LF = RoHS compliant / Pb free) 02122020 Jauch Quartz GmbH • e-mail: info@jauch.com • full data can be found under: www.jauch.com All specifications are subject to change without notice Oscillator JO22 · 1.8 V ~3.3 V · Stop Function SUPPLY CURRENT VS. VCC AT DIFFERENT FREQUENCIES; CL = 5 PF SUPPLY CURRENT VS. VCC AT DIFFERENT FREQUENCIES; CL = 10 PF 3,5 3,0 50 MHz 3,0 50 MHz 48 MHz 2,5 48 MHz 2,5 40 MHz 40 MHz 30 MHz 2,0 25 MHz 20 MHz 1,5 16 MHz 12 MHz 1,0 36 MHz 2,0 Supply current in mA Supply current in mA 36 MHz 30 MHz 25 MHz 20 MHz 1,5 16 MHz 12 MHz 1,0 10 MHz 10 MHz 8 MHz 0,5 8 MHz 0,5 4 MHz 4 MHz 2 MHz 0,0 1,7 1,9 2,1 2,3 2,5 2,7 2,9 3,1 2 MHz 0,0 3,3 1,7 1,9 2,1 2,3 2,5 Vcc in V SUPPLY CURRENT VS. VCC AT DIFFERENT FREQUENCIES; CL = 15 PF 5 50 MHz 4 48 MHz 40 MHz 36 MHz Supply current in mA 2,7 2,9 3,1 3,3 Vcc in V 3 30 MHz 25 MHz 20 MHz 2 16 MHz 12 MHz ENABLE / DISABLE FUNCTION pin #1 (e/d control) pin #3 (output) open active high "1" (VIH ≥ 0.8 VDC) active low "0" (VIL ≤ 0.2 VDC) high impedance stop function: • oscillator stops • output high impedance 10 MHz 1 8 MHz 4 MHz 500 pcs per reel 2 MHz 0 1,7 1,9 2,1 2,3 2,5 2,7 2,9 3,1 3,3 Vcc in V PACKAGING NOTE  standard packing unit is 500 pieces per reel – – customized quantities on request TAPING SPECIFICATION 8.75±0.3 4.0 ø 178±2.0 ø 13±0.5 2.0 ±0.1 60.5±0.5 120° 8.0 2.7 ±0.05 1.75 ø 1.55 ø 21±0.5 4.0 1.15 ±0.05 2.25 ±0.05 Feeding MARKING REFLOW SOLDERING PROFILE temperature (°C) 10 s max. 260 200 260 °C max. 220 ±5 °C 180 ±5 °C 150 100 60 ~ 180 s in mm 60 s max. 50 time (s) note: parts are also suitable for soldering systems with lead (Pb) content frequency company / stability code / date code date code: A ~ M: Jan. - Dec. 9: 2019 0: 2020 1: 2021 2: 2022 3: 2023 4: 2024 Jan. Febr. Mar. Apr. May June A B C D E F July Aug. Sept. Oct. Nov. Dec. G H J K L M 02122020 Jauch Quartz GmbH • e-mail: info@jauch.com bedata found under: www.jauch.com info@jauch.de • full data canfull can be found under: All specifications are subject to change without notice www.jauch.de | www.jauch.co.uk | www.jauch.fr | www.jauchusa.com